hig.sePublications
Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard-cite-them-right
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • sv-SE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • de-DE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Undersökning av nätverks-RTK-meddelande tillsammans med olika GNSS-mottagare: vid nätverks-RTK-mätning i SWEPOS®-nät av fasta referensstationer
University of Gävle, Faculty of Engineering and Sustainable Development, Department of Industrial Development, IT and Land Management.
2012 (Swedish)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE creditsStudent thesis
Abstract [sv]

Nätverks-RTK (Real-Time Kinematic) är en metod för positionsbestämning med Global Navigation Satellite System (GNSS) i realtid. Metoden kräver att en driftledningscentral kan kommunicera med de GNSS-mottagare som använder referensstationsnätet, för att bland annat skicka ut korrigerade GNSS-data. I Sverige erbjuder SWEPOS, ett nät av fasta referensstationer, en tjänst för nätverks-RTK-mätning, som förväntas ge en mätosäkerhet på mindre än 15 mm i plan och 25 mm i höjd (över ellipsoiden) (med täckningsfaktorn k = 1 i bägge fallen). Den teknik som idag används av SWEPOS för att utföra positionsbestämning av GNSS-mottagare är Virtuell Referensstation (VRS). VRS kräver tvåvägskommunikation eftersom mottagaren skickar in sin absoluta position till nätverks-RTK-programvaran hos driftledningscentralen, var beräkningarna av korrektionsdata sker, innan de skickas tillbaka till mottagaren. Det finns ett annat alternativ som möjliggör envägskommunikation, nämligen nätverks-RTK-meddelande. Då sänds observationsdata, i form av korrektioner, ut till mottagaren som utför positionsberäkningarna.

Syftet med det här examensarbetet var att undersöka nätverks-RTK-meddelande för GNSS-mottagare av tre olika fabrikat med avseende på initialiseringstider, mätosäkerhet, avståndsberoende från närmaste masterstation, och GLONASS-satelliters deltagande i positionsbestämningen. I studien ingick även att utföra några jämförande mätningar med VRS. Undersökningarna gjordes genom upprepade nätverks-RTK-mätningar med GNSS-mottagare från Leica Geosystems, Trimble och Topcon, på tre kända punkter sydöst om Gävle. Tre mätmetoder användes, nätverks-RTK-meddelande med automatiskt nät (tvåvägskommunikation) och statiskt nät (envägskommunikation), samt VRS. De tre mätpunkterna valdes så att avståndet, till den referensstation som användes som en så kallad masterstation, varierade.

Studien visade att initialiseringstiderna skiljde mellan de tre mottagarfabrikaten. En anledning till detta var att varje mottagare ominitialiserades från olika lösningslägen. Generellt var mätosäkerheten något högre för statiskt nät. Mätosäkerheten var omkring 11 mm i plan och 19 mm i höjd med det automatiska nätet, samt 13 mm respektive 22 mm i det statiska nätet. Fabrikaten emellan, låg Leica och Trimble på samma nivå, medan Topcon hade ett generellt problem för det statiska nätet, vilket det inte fanns möjlighet att närmare utreda orsaken till. Resultatet visade även att mätosäkerheten påverkas av avståndet till använd masterstation. I några fall var dessa förhållanden linjära. Vid några tillfällen användes inte GLONASS-satelliter i positionsbestämningen.

Abstract [en]

Network RTK (Real-Time Kinematic) is a method of positioning with Global Navigation Satellite System (GNSS) in real-time. The method requires that a control centre can communicate with the GNSS receiver, which is using the reference station network, for example to send out corrected GNSS data. In Sweden, SWEPOS, which is a network of permanent reference stations for GNSS, offers a service for Network RTK measurement. This is expected to give an uncertainty of less than 15 mm in plane and 25 mm in (ellipsoidal) height (with the coverage factor k = 1 in both cases). The technology currently used by SWEPOS, to perform positioning of a GNSS receiver, is Virtual Reference Station (VRS). VRS requires two-way communication because the receiver submits its navigated location to the control centre, where the calculations of correction data are made, before they are sent back to the receiver. Another alternative is Network RTK messages which make use of one-way communication. Then the observation data are transmitted to the receiver, which performs determination of its position.

The purpose of this thesis was to investigate the network RTK messages with GNSS receivers from three different manufacturers with regard to time to fix ambiguities, measurement uncertainty and its dependence on the distance from the master station, and GLONASS satellites presence in the positioning. Also included in the study was the performance of comparative measurements with VRS. The investigations were conducted through repeated network RTK measurements with GNSS receivers from Leica Geosystems, Trimble and Topcon, at three known points south-east of Gävle. Three methods were used, network RTK message with automatic and static networks, and VRS. The three measurement points were chosen so that the distance to the reference station that was used as the so-called master station, varied.

The study showed that the time to fix ambiguities differed between the three brands. One reason for this was that each receiver was reinitialized from different steps in the initialization process. In general, the uncertainty in the measurement was slightly higher for the static network. The uncertainty was about 11 mm in plane and 19 mm in height with the automated network, and 13 mm and 22 mm respectively in the static network. Leica and Trimble were at the same level, while Topcon had general problems for the static network, which there was no possibility to closer investigate the reason for. The results also showed that the uncertainty is influenced by the distance to used master station. In some cases, this relationship is linear. On some occasions, GLONASS satellites were not included in the positioning.

Place, publisher, year, edition, pages
2012. , p. v+31+bilagor
Keywords [en]
GNSS, SWEPOS, Network RTK message, Master-Auxiliary Concept (MAC), Virtual Reference Station (VRS)
Keywords [sv]
GNSS, SWEPOS, Nätverks-RTK-meddelande, Master-Auxiliary Concept (MAC), Virtuell Referensstation (VRS)
National Category
Civil Engineering
Identifiers
URN: urn:nbn:se:hig:diva-12395OAI: oai:DiVA.org:hig-12395DiVA, id: diva2:540356
Subject / course
Lantmäteriteknik
Educational program
Surveying
Uppsok
Technology
Supervisors
Examiners
Available from: 2012-07-10 Created: 2012-07-09 Last updated: 2012-07-10Bibliographically approved

Open Access in DiVA

fulltext(1199 kB)392 downloads
File information
File name FULLTEXT01.pdfFile size 1199 kBChecksum SHA-512
2af20bcd5d515020cd9f486d76f3862452f012db76b0feba7217b3481f5f612e2db24c12004e015b48ccd2136d38307058f42cacc71d5dd352dc4a81373a882c
Type fulltextMimetype application/pdf

By organisation
Department of Industrial Development, IT and Land Management
Civil Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 392 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

urn-nbn

Altmetric score

urn-nbn
Total: 559 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard-cite-them-right
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • sv-SE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • de-DE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf