Förprojektering inför byte av styrsystem
2016 (Swedish)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE credits
Student thesis
Abstract [sv]
Ett ställverk vars uppgift är att strömförsörja 58 stycken motorstyrningar ska bytas ut mot ett nytt på Stora Enso. I dagsläget styrs ställverket av styrsystemet ABB 800XA och det nya ställverket kommer istället att styras från en Siemens S7-400. Även DCS systemet kommer att uppgraderas till en Honeywell C300 kontroller.
Examensarbetet har gått ut på att genomföra en förprojektering inför ställverksbytet vilket huvudsakligen bestått av att programmera PLC:n och C300 kontrollern. Operatörsbilderna har sedan anpassats med nya symboler för att kunna köra de nya motordrifterna. Syftet med förprojekteringen är att så mycket som möjligt ska vara förberett inför ställverksbytet för att stopptiden vid bytet ska kunna minimeras. Även om den verkliga driftsättningen inte utförts kan ändå ett resultat presenteras i form av påvisad funktion vid simulering av både PLC och HMI.
Tillvägagångssättet för att kunna utföra programmeringen var att utgå från det gamla programmet i ABB. Ritningar och sekvensbeskrivningar har används och rundvandringar genomförts för att få en känsla hur systemet är uppbyggt. Rapporten innehåller en beskrivning hur systemet är uppbyggt samt hur programmeringen har genomförts.
En del av nyinvesteringen består av att använda PROFINET istället för I/O till dataöverföringen mellan styrsystem och fältenheter. Detta gör att det finns ett behov av att genomföra en forskningsstudie för att jämföra de två teknikerna. Denna rapport innehåller den teoretiska grunden som krävs för själva övergången från I/O till PROFINET. Syftet med forskningen är att utreda konsekvenser och värdet av en övergång till PROFINET. Resultatet av arbetet är att det finns ett värde att gå över till PROFINET. En konsekvens av övergången till PROFINET är att man får ett minskat antal kablar vilket förenklar underhåll och gör det enklare att utöka systemet.
Abstract [en]
A switchgear used to power 58 motors is supposed to be exchanged to a new one at Stora Enso. The switchgear is currently controlled by an ABB 800XA and the new switchgear is supposed to be controlled by a Siemens S7-400. The DCS system is also going to be renewed to a Honeywell C300 controller.
This dissertation contains planning for the implementation of the new switchgear which mainly consists of programming the PLC and C300 controller. The operator images were adapted with new symbols to be able to control the motors with the new controllers. The purpose with this dissertation was to plan as much as possible for the future switchgear to minimize the downtime caused by the change. A result can be presented without testing the program in the real environment. The simulation of the PLC and HMI indicates a functioning program.
The previous program in ABB was used in the procedure of creating the new program. Drawings and sequence descriptions has been used and inspections of the current switchgear has been carried out to get a sense of the system structure. The dissertation contains a description of the system structure and how the programming has been executed.
A part of these investments consists of using PROFINET instead of I/O for the data transmission between the controller and the field units. This creates a need for a science study to compare the two technologies. This dissertation contains the theoretical foundation needed for the transfer to PROFINET. The purpose with this study is to investigate consequences and the value of the switch from I/O to PROFINET. The result of this work is that there is a value in using PROFINET. A consequence of PROFINET is a reduced number of wires resulting in a simplified maintenance and makes it easier to expand the system.
Place, publisher, year, edition, pages
2016. , p. 100
National Category
Robotics and automation
Identifiers
URN: urn:nbn:se:hig:diva-22584OAI: oai:DiVA.org:hig-22584DiVA, id: diva2:1038526
External cooperation
Stora Enso Fors AB
Subject / course
Electronics
Educational program
Högskoleingenjör
Presentation
2016-06-16, 11:00 (Swedish)
Supervisors
Examiners
2016-10-202016-10-182025-02-09Bibliographically approved