Bottenaska som ersättare till cement i klimatförbättrad betongShow others and affiliations
2025 (Swedish)Report (Other academic)
Abstract [sv]
Projektet "Bottenaska som ersättare till cement i klimatförbättrad betong" undersöker möjligheten att använda bottenaska, som produceras vid förbränning av kommunalt avfall (municipal solid waste incineration bottom ash, MSWIBA), som en delvis ersättning för cement i betong med avseende på betongens mekaniska egenskaper. Betong är ett oundvikligt material inom byggindustrin och består av cement, vatten, finkorniga och grovkorniga ballastmaterial. Produktionen av cement förbrukar naturresurser, orsakar luftföroreningar och släpper ut växthusgaser, vilket leder till drastiska förändringar i klimatförhållanden. För att motverka detta arbetar betongindustrin mot klimatneutral betong till år 2030, med en strategi som innefattar optimering av bindemedel och minskning av cementinnehållet. En betydande ökning av produktionen av kommunalt avfall har noterats i samband med förändrade levnadsvanor och urbanisering. Bortskaffandet av det genererade avfallet genom förbränning producerar MSWIBA och flygaska från kommunalt avfall (municipal solid waste incineration fly ash, MSWIFA). MSWIBA utgör cirka 90% av restprodukten och innehåller olika oxider, vilket gör askan jämförbar med olika kompletterande bindemedel. I detta projekt samlades in fem olika MSWIBA (benämnda BA1-BA5). De undersöktes avseende kemiska ingredienser, mineralsammansättningar och partikelstorleksfördelning (particle size distribution, PSD). Efter genomförda röntgendiffraktionsanalyser (X-ray diffraction, XRD) och PSD på alla prover valdes de prover (BA3 och BA5) som visade pozzolanska egenskaper och partikelstorlekar närmast konventionell cement för vidare studier.Olika betongblandningar bereddes med 10% och 20% ersättning av cement med rå och aktiverad MSWIBA (BA3 och BA5). Totalt gjöts och analyserades 81 provkuber. Egenskaperna hos färsk och härdad betong jämfördes med kontrollblandningen. Prestanda och hållfasthetsökning för varje blandning undersöktes genom provning av tryckhållfastheten vid 7, 28 och 56 dygn. Betongblandningar med rå MSWIBA uppvisade liknande bearbetbarhet som kontrollblandningen, medan blandningar med aktiverad MSWIBA visade en ökad bearbetbarhet. Betongens densitet minskade med en ökning av ersättningsandelen MSWIBA, vilket innebär att lättare betong kan framställas genom tillsats av MSWIBA. Dock hade aktivering av MSWIBA ingen betydande positiv effekt på tryckhållfastheten hos betongblandningarna. Även om tryckhållfastheten minskade med ökad ersättningsandel av MSWIBA uppnådde betongblandningen med 10% ersättning av rå BA5 cirka 77% av tryckhållfastheten hos kontrollprovet efter 56 dygn. För alla betongblandningar med MSWIBA visade blandningen med BA3 bättre prestanda än blandningen med BA5 efter 7 dygn. Vid längre härdningstider uppvisade dock betongblandningen med BA5 högre tryckhållfasthet än blandningen med BA3. Betongblandningen med 20% rå och aktiverad MSWIBA uppnådde 58% av tryckhållfastheten hos kontrollprovet efter 56 dygn. Trots minskningen i betongens tryckhållfasthet erbjuder denna hållbara betong potentiella fördelar inom avfallshantering. Användning av MSWIBA som en ersättning för cement kan också bidra till utvecklingen av klimatförbättrad betong. Detta projekt kan utökas till två olika faser: (1) Att studera effekten av att blanda MSWIBA med andra kompletterande cementbundna material, såsom flygaska, silikastoft eller mald granulerad masugnsslagg, för att ersätta en del av cementen. På detta sätt kan MSWIBA lägre reaktivitet kompenseras. Följaktligen kan lika bra eller överlägsen tryckhållfasthet för betongen uppnås genom denna synergi, tillsammans med förbättrade hållbarhetsegenskaper. (2) Att undersöka MSWIBA som en ersättning för ballastmaterial i betong. En annan potentiell användning för MSWIBA är som ersättning för ballast i betong, vilket bidrar till utvecklingen av mer miljövänlig betong. Detta minskar efterfrågan på naturliga ballastmaterial och hjälper till att bevara naturresurser.
Abstract [en]
The project ‘‘Bottom Ash as a Replacement for Cement in Climate-Improved Concrete’’ investigates the possibility of using bottom ash, produced from municipal solid waste incineration (municipal solid waste incineration bottom ash, MSWIBA), as a partial replacement for cement in concrete, with regard to the mechanical properties of concrete. Concrete is an indispensable material in the building industry and consists of cement, water, fine aggregates, and coarse aggregates. The production of cement consumes natural resources, causes air pollution, and emits greenhouse gases, leading to drastic changes in climate conditions. To counteract this, the concrete industry is working toward climate-neutral concrete by 2030, with a strategy that includes optimizing binders and reducing cement content. A significant increase in municipal waste production has been noticed due to changes in lifestyles and urbanization. The disposal of the generated waste through incineration produces MSWIBA and municipal solid waste incineration fly ash (MSWIFA). MSWIBA accounts for approximately 90% of the residue product and contains various oxides, making the ash comparable to different supplementary binders. In this project, five different MSWIBAs (named BA1–BA5) were collected. They were examined for their chemical ingredients, mineral compositions, and particle size distribution (PSD). After conducting X-ray diffraction (XRD) and PSD analyses on all samples, the samples (BA3 and BA5) that exhibited pozzolanic properties and particle sizes closer to conventional cement were selected for further studies. Various concrete mixes were prepared with 10% and 20% replacements of cement using raw and activated MSWIBAs (BA3 and BA5). A total of 81 test cubes were cast and analyzed. The properties of fresh and hardened concrete were compared to the control mix. The performance and strength developments of each mix were studied by conducting compressive strength tests at 7, 28, and 56 days. Concrete mixes with raw MSWIBAs showed similar workability to the control mix while mixes with activated MSWIBAs exhibited increased workability. The density of concrete decreased as the MSWIBAs replacement percentage increased, indicating that lighter concrete can be produced by incorporating MSWIBAs. However, the activation of MSWIBAs had no significant positive effect on the compressive strength of the concrete mixes. Although the compressive strength decreased with increasing the replacement ratio of MSWIBAs, the concrete mix with 10% replacement of raw BA5 achieved around 77% of the compressive strength of the control specimen after 56 days. For all concrete mixes containing MSWIBAs, the mix with BA3 showed better performance than the mix with BA5 after 7 days. However, at longer curing times, the concrete mix with BA5 exhibited higher compressive strength than the mix with BA3. The concrete mix with 20% raw and activated MSWIBAs obtained 58% of the compressive strength of the control specimen after 56 days. Despite the reduction in the compressive strength of concrete, this sustainable concrete offers potential benefits in terms of environmental protection and waste management. The use of MSWIBA as a substitute for cement can also contribute to the development of climate-improved concrete. This project can be extended into two different phases: (1) studying the effect of mixing MSWIBA with other supplementary cementitious materials, such as fly ash, silica fume, or ground granulated blast furnace slag, to replace part of cement. In this way, the lower reactivity of MSWIBA can be compensated. Consequently, similar or even superior compressive strength for concrete can be achieved through this synergy, along with improved durability properties. (2) Investigating MSWIBA as a substitute for aggregates in concrete. Another potential application of MSWIBA is replacing aggregates in concrete, contributing to the development of more environmentally friendly concrete. This reduces the demand for natural aggregates and helps conserve natural resources.
Place, publisher, year, edition, pages
Energiforsk , 2025. , p. 56
Keywords [en]
Sustainable concrete, bottom ash, activation, fresh properties, hardened properties, particle size, minerals, slump value, compressive strength
Keywords [sv]
Hållbar betong, bottenaska, aktivering, färska egenskaper, härdade egenskaper, partikelstorlek, mineraler, sättmått, tryckhållfasthet
National Category
Civil Engineering
Research subject
Sustainable Urban Development
Identifiers
URN: urn:nbn:se:hig:diva-51010ISBN: 978-91-89918-11-5 (electronic)OAI: oai:DiVA.org:hig-51010DiVA, id: diva2:2100332
Funder
Energy Research, 2025:1117
Note
Slutrapport: Energiforsk
2026-09-102026-09-102026-09-10Bibliographically approved